Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 28.06.2025 04:57

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

For this case there are devices called Metal oxide varistors (MOV).

What is lightning?

These are simplified answers to the original question, and does not change anything I wrote above.

Why do liberals have a problem with masculine men like Andrew Tate?

One

This is the picture of an electronic coil of wire wound around a core of magnetic material.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

Squished Like a Bug By an Ornithopter Playing Dune: Awakening PvP? You're Not Alone — And Funcom's Looking Into It - IGN

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

Barnstars:

Is it possible for people who claim to be genuine and honest to actually not be? If so, why do they behave this way?

There are two important concepts here.

This is 'the assistant's answer'

I post the exact comment here.

The Easiest Way to Lower Cortisol, According to a Longevity Expert - Vogue

A circuit breaker is similar, but is resettable.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

So, the voltage could go up to 500 volts, and the fuse will not open up.

Democrat voters, why are you so naive, easy to manipulate, can't see a liar standing right in front of you and why won't you research your party? You will find they have a plan for all W. Nations and it's evil.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

It seems Mohan does not understand the difference between a comment and an Answer.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

In axing mRNA contract, Trump delivers another blow to US biosecurity, former officials say - ABC News

2024–10–16 [ OO OLAOYE OYEBODE ]

[old diagram got deleted by accident]

This one hit behind the barn.

How long does it typically take for prices to return to normal after tariffs are removed?

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

Because the load is inductive, the current lags the voltage.(by a bit).

The other is “what does a “fuse” do?”

How has your life changed since starting college?

2024–10–10[John johnson John Johnson ]

A fuse is a non-resetable over current circuit protector.

First Sentence:

To prevent ovarian cancers, fallopian tube removal is on the rise - statnews.com

He then describes the function of a fuse.

Edit 2024–10.

One is “what exactly is in a ‘surge protector’ ? ”

If you caught a shoplifter at your yard sale, how would you handle it?

The bolt then partially travels down the line to your home.

There are three different concepts here that are getting confused.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

Meghan Markle’s Disneyland Family Post Fuels More Backlash After “Cringe” Pregnancy Dance - boredpanda.com

but this device (an Inductor) … impedes the rapid changes in the current.

An AC voltage/ current source, and an ac inductive load.

The MOV will conduct when the voltage exceeds 50% of line voltage.

Do you think Lady Gaga and Celine Dion have rehearsed separately for their performance at the Olympics opening ceremony?

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

(Dc diagram shown, AC is similar).

Is it mandatory for restaurants to wash glasses after every use?

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

nine

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

Empowering Coffeehouse Leaders: Starbucks expands Assistant Manager Role across the U.S. - Starbucks Coffee

But it can get overloaded, and no longer works.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

what exactly is a ‘surge’ protector?

Now when you have a certain ac resistance, then a current flows in a loop.

It also is a device that limits the change in current flow.

Here is a simplified AC power diagram.

so, what happens?

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

This is where this question deviates from being a 'generic' question, and becomes more specific.

[image of Common-mode choke]

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

eight

What does a fuse do?

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

In schematic diagrams this is the symbol for a fuse:

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

But… the neutral is now “floating” because of the 1 ohm resistance.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

This device then solves the entire problem.

a photo is worth a thousand words.

the problem then depends on "how fast does the fuse operate?".

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

Upvotes:

This is where the MOV conducts again, and dissipated the energy.

2024–10–14 [Omar Gharbi Omar Gharbi ]

The third is lightning and “how it gets conducted into a home.”

but I think this circuit , shows a few more pieces.

At least they know the answer if they wanted it.

He then describes Rainy Season and Lightning.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

These devices are installed between the “hot” and “neutral” and protective ground.

He then asserts :

At one ohm, the resistor has a maximum of 1 watt power.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”